Once installation of the M1, cables and antennas are complete, the M1 is configured using the Cortex On board App on a mobile device (iOS or Android) or via a Cortex H1 or H1P handset.
Open the onboard app on your device.
Tap the WiFi icon
Tap the Config Icon (wrench)- then tap Select
The device will open the QR code- point the camera at the QR label
And the camera will scan the QR code
Press select, and it will confirm the connection to the SSID of your Cortex
Press connect and you are now connected and the SSID and Password should be retained in the app.
Tap outside of the dialog screen and you are now connected and can use the app.