- Turn Cortex M1 and device ON
Switch the vessel's batteries ON to power the M1.
- Select WiFi in the settings of the device
> From the list of available WiFi, identify and select the M1 WiFi SSID.
Note - The WiFi SSID is identified by the M1 serial number eg: CORTEX-95211616
> Key the WiFi password found on the label
supplied with the M1.
Alternatively, scan the QR code of the M1 (found on the WiFi label) to be automatically connected.
> Join and save to connect.
> Close the WiFi setting on the device.
Note - If the supplied label is lost, the WiFi password is found underneath the M1 on the serial label.
For further assistance raise a support ticket.