Name and configure up to 5 general purpose sensors, 2 x input/output, 3 x input.
- Download the Cortex Onboard App
Free download from the iOS or Google Play stores
- Turn Cortex M1 and device ON
Switch the vessels batteries ON to power the M1
- Connect the device to the M1 via WiFi
See Connecting to an M1 section
- Open the app and program as follows;
> Select the Main Menu icon () to open the Settings Menu.
> Device Settings...
> Sensor / control name
> Sensor / control type (select from list)
> Default input high
> Pullup active (select Enabled or Disabled)
> Active when high (select Yes for Normally Closed, select No for Normally Open)
Note - An external Pullup voltage connection is recommended when connecting GPIO sensors to the M1. When a sensor does not provide more than 2V, the Pullup provides an appropriate high level reference for the M1's input.