Name and configure up to 5 general purpose sensors, 3 x input, 2 x input/output.
- Turn Cortex M1 and handset ON
Switch the vessels batteries ON to power the M1 - Connect the handset to the M1 via WiFi
See Connecting to an M1 section - Select the handset Main Menu and program as follows;
> Main Menu. (
) Select the wrench icon (
) to open the Configuration Menu.
> Sensors
> GPIO
> Sensor / control name
> Sensor / control type (select from list)
> Default input high
> Pullup active (select Enabled or Disabled)
> Active when high (select Yes for Normally Closed, select No for Normally Open)