This feature requires Cortex software version 1.4 or higher.
WiFi configuration is managed via the Cortex Onboard app or the Cortex Handset. Either the Handset or your mobile device running Cortex Onboard should be connected to the Cortex Network.
Hub configuration
| Action | Handset / Android version of CortexOnboard | iOS version of CortexOnboard |
| Select "Menu" at the upper left of the display |  |
 |
|
Select "Settings"
Select "Device Settings" (iOS only)
|
 |
  |
| Select "Networks" |  |
 |
| Select "WiFi" |  |
 |
|
Select "CONFIGURE" in the Boat Network window
Tap ">" behind SSID to display all available WiFi networks (iOS Only)
|
 |
 |
|
Select the boat network you want the Hub to connect to
Enter the password of the WiFi network
Click Configure to confirm the Network Selection
|
 |
 |
|
The status in the Boat Network window should be "Hub Connected" to indicate that the Hub has successfully joined the boat network |
 |
 |
Wifi Network Selection
You can choose which network your device will use from the WiFi Configuration screen. You can only choose to use the boat network if it has already been configured.
| Selected Network | Handset / Android version of CortexOnboard | iOS version of CortexOnboard |
|
Cortex Network If you want your device to be connected to the Cortex Hub directly then "Use Boat Network" should be disabled |
 |
 |
|
Boat Network If you want your device to be connected to the Boat Network then "Use Boat Network" should be enabled |
 |
 |